Name Plate Design

Today I spent a bit of time getting used to some basic 3D modelling software called [TinkerCad]( designing a name plate for the side of the bonnet.

Below are screenshots of the design, first starting with a top down view

Then a front aspect

Then a side aspect

The model is 130mm wide, 20mm tall with the inset 3mm smaller on all aspects.

The base has a height of 1mm, the yellow “insert” is 0.5mm tall and the letters are 0.25mm tall making the entire print 1.75mm thick.

  • Published October 18, 2023
  • Category Banana Castle
Tag1, Tag2, Tag3